Site icon Codanics

Standard Curve Calculator: 4PL, 5PL and Linear (ELISA)

Standard Curve Calculator: free online tool by Codanics that runs in your browser
Lab & life science

Standard Curve Calculator: 4PL, 5PL and Linear Fits for ELISA, Bradford and BCA

Paste your standards (concentration and replicate readings) and your samples. The calculator fits a linear, quadratic, 4-parameter logistic (4PL) or 5PL curve, compares the models, and back-calculates every unknown with a 95% confidence interval, dilution correction, replicate %CV and a warning when a sample falls outside the standard range.

✅ No login needed100% freeRuns in your browserYour data stays on your device
Standard Curve Calculator✅ Free · no login📚 Cite this tool
Your data never leaves your PC. Your data is analysed on your own computer or phone, even when you upload a CSV or Excel file. Nothing is uploaded, stored or seen by Codanics, and no login is needed.
  • PriceFree, no login or sign-up needed
  • Your dataProcessed in your browser, never uploaded
  • Works onPhone, tablet or computer, any modern browser
  • Made byDr. Muhammad Aammar Tufail, Codanics
  • Published16 November 2026
  • Last updated16 November 2026

📚 How to cite this tool

This tool is free. If it helped your thesis, paper, report or assignment, please cite it. It keeps the tools free and helps other students find them.

Citation · APA 7th edition

Tufail, M. A. (2026). Standard curve calculator (4PL, 5PL and linear) [Online tool]. Codanics. Retrieved 16 November 2026, from https://codanics.com/tools/standard-curve-calculator/

In-text citation: (Tufail, 2026) · Narrative: Tufail (2026)

The access date is today’s date, filled in automatically. Author: Muhammad Aammar Tufail. Published 16 November 2026.

🚀 Follow Codanics channel on WhatsApp for more updatesNew free tools, scholarships, PhD positions and research tips, straight to your phone. Free lessons on YouTube too.

How to use the Standard Curve Calculator

  1. Paste your standards in the left box: the concentration, then the replicate readings, one standard per line (or use Paste from Excel / Upload CSV / Excel).
  2. Paste your samples in the right box as Name: reading reading. Add x10 (or df=10) after a sample that was diluted 10-fold, or set one dilution factor for all samples.
  3. Choose the curve: 4PL for ELISA and other sigmoidal assays, linear or quadratic for Bradford and BCA. Enter the blank reading if your readings are not blank-corrected yet.
  4. Click Fit curve and calculate. Check the chart, the recovery of the standards and the model comparison, then read the sample concentrations, their 95% CIs and the range flags.
  5. Download the results as CSV, copy the tables into Excel and save the curve as PNG or SVG for your lab notebook or thesis.

What a standard curve does

A standard curve (calibration curve) links the signal your instrument measures (absorbance, fluorescence, luminescence) to a known concentration. You measure a dilution series of a standard with known concentrations, fit a curve through the points, and then read the concentration of each unknown sample from its signal. This is called interpolation or back-calculation.

Which curve should I use?

AssayTypical curveWhy
Sandwich or competitive ELISA, multiplex bead assays4PL (5PL if the curve is clearly asymmetric)The signal levels off at both ends, giving an S-shaped curve on a log concentration axis
Bradford protein assayQuadratic (or linear over a narrow range)Coomassie binding saturates, so the curve bends at high protein concentrations
BCA and Lowry protein assaysLinear or quadraticNearly linear over the working range
Colorimetric assays that follow Beer–Lambert (nitrate, phosphate, glucose)LinearAbsorbance is proportional to concentration
qPCR standard curves (Ct vs log copies)Linear on log₁₀ concentrationUse the slope to calculate PCR efficiency

Do not judge the model by R² alone: a model with more parameters always has a higher R². The calculator compares the models with AICc, which penalises extra parameters, and shows the recovery of each standard (back-calculated ÷ nominal concentration). Good curves give recoveries of 80–120%.

Formulas

Linear: y = a + b·x x = (y − a) / b Quadratic: y = a + b·x + c·x² x = root of c·x² + b·x + (a − y) = 0 on the standards’ branch 4PL: y = c + (d − c) / (1 + exp(b·(ln x − ln e))) x = e · ((d − c)/(y − c) − 1)^(1/b) 5PL: y = c + (d − c) / (1 + exp(b·(ln x − ln e)))^f x = e · (((d − c)/(y − c))^(1/f) − 1)^(1/b) SE(x̂) ≈ √( s²/m + gᵀ·Cov(θ)·g ) / |f′(x̂)| (delta method; m = replicates of the sample, g = ∂f/∂θ at x̂) Recovery % = back-calculated concentration / nominal concentration × 100 %CV = SD / mean × 100

In the 4PL, c and d are the lower and upper plateaus, e is the inflection point (the EC50 or IC50: the concentration giving a response halfway between the plateaus) and b is the slope at the inflection point (negative for an increasing curve in this parameterisation). The 4PL and 5PL use the same parameterisation as the LL.4() and LL.5() functions of the R package drc, and the fits were checked against R.

Tips for a reliable standard curve

  • Run standards in duplicate or triplicate on every plate, and use 6–8 levels for a 4PL so both plateaus are covered.
  • Stay inside the range. A sample whose signal is above the top standard must be diluted and re-run, not extrapolated. Samples below the lowest standard are reported as “< LLOQ” (lower limit of quantification).
  • Prepare the dilution series carefully. Plan it with the dilution and serial dilution calculator and make the stock with the molarity calculator.
  • Use weighting (1/y or 1/y²) when the scatter of the replicates grows with the signal, which is common in ELISA. It stops the high standards from dominating the fit.
  • Check the replicate CV. CVs above 15–20% point to pipetting errors or bubbles in the wells.

How to report it

“IL-6 concentrations were interpolated from a four-parameter logistic standard curve (eight standards, 0.05–12.5 ng/mL, R² = .999). Samples were run in triplicate and multiplied by their dilution factors; samples above the top standard were diluted and re-assayed.”

Learn to fit these curves yourself in R in the R with Aammar course, and write up your methods with the scientific writing guide.

Learn the statistics behind these numbers. Codanics has free statistics, R and Python lessons on YouTube and full courses for researchers.

Frequently asked questions

What is a 4PL curve?

A four-parameter logistic (4PL) curve is an S-shaped curve with a lower plateau, an upper plateau, an inflection point (EC50) and a slope. It is the standard model for ELISA and other immunoassays because their signal levels off at very low and very high concentrations.

When should I use 5PL instead of 4PL?

Use 5PL only when the curve is clearly asymmetric around its inflection point and you have enough standards (at least 7–8 levels). The extra asymmetry parameter makes the other parameters less precise, so if the AICc of the 5PL is not lower than that of the 4PL, keep the 4PL.

Why is my sample flagged as out of range?

Its reading is below the lowest standard or above the highest standard, so its concentration is extrapolated from the curve and unreliable. Dilute samples that are too high and re-run them. Report samples below the lowest standard as below the limit of quantification.

How do I enter dilution factors?

Set one dilution factor for all samples, or write x10 (or df=10, or 1:10) after an individual sample’s readings, for example ‘Serum B: 1.205 1.188 x10’. The final concentration is the concentration in the well multiplied by the dilution factor.

Should I subtract the blank?

Yes, if your plate reader has not already done it. Enter the mean blank reading and it is subtracted from every standard and sample. If your standards include a zero-concentration standard, you can instead leave it in as a standard; the 4PL lower plateau then models the background.

How is the confidence interval for a sample calculated?

With the delta method: the uncertainty of the fitted curve and the scatter of the sample’s own replicates are combined and divided by the slope of the curve at that point. For 4PL and 5PL the interval is computed on the log scale, so it is asymmetric and never negative.

Does this give the same result as GraphPad Prism or R?

The 4PL and 5PL fits use the same equations as R’s drc package (LL.4, LL.5) and GraphPad’s 4PL/5PL with log concentration, and were checked against R: parameters, standard errors and interpolated concentrations agree. Small differences can appear if a program uses a different 5PL form or weighting.

Is my data uploaded?

No. All fitting runs in your browser. Your plate data never leaves your computer and is not stored by Codanics.

Do I need to log in or create an account to use the Standard Curve Calculator?

No. There is no login, no sign-up and no email required. Open the page and start using it straight away, for free, on any device.

How do I cite this tool in my thesis or paper?

Use the citation box on this page. In APA 7th edition: Tufail, M. A. (2026). Standard curve calculator (4PL, 5PL and linear) [Online tool]. Codanics. Retrieved [date you used it], from https://codanics.com/tools/standard-curve-calculator/. BibTeX, RIS (EndNote, Mendeley, Zotero), MLA, Harvard, Chicago and Vancouver formats are also available.

Free guides and courses from Codanics

More free tools

See all free Codanics tools → · Codanics on YouTube · WhatsApp channel

Made by Dr. Muhammad Aammar Tufail, Codanics. First published 16 November 2026, last updated 16 November 2026. Found a bug or have an idea for a new tool? Tell us on the WhatsApp channel or in the comments on YouTube. Results are for learning and planning; check important analyses with a statistician or your supervisor.
Exit mobile version