Risk of Bias and GRADE Quiz: Test Your Evidence Appraisal Skills
Check how well you can judge the evidence in a systematic review: data extraction forms and dual extraction, RoB 2 for trials, ROBINS-I and Newcastle–Ottawa for observational studies, QUADAS-2, traffic-light plots, GRADE certainty, summary of findings tables and sensitivity analyses. Built from the Scientific Writing Marathon course.

Risk of Bias & GRADE Quiz
60 questions · 7 topics · timer · instant explanations · printable mark sheet.
- Questions60 in the bank, 10–30 per attempt
- Levels20 easy · 24 medium · 16 hard
- TimeAbout 5–20 minutes
- PriceFree, no login needed
- Made byDr. Aammar Tufail, Codanics
- Updated22 November 2026
In short: the Risk of Bias & GRADE Quiz is a free online multiple-choice quiz by Codanics with 60 questions on data extraction forms; RoB 2 for randomised trials; ROBINS-I and Newcastle–Ottawa; QUADAS-2 and bias plots; GRADE certainty of evidence; summary of findings tables; and sensitivity analyses. You choose the number of questions and the difficulty, answer against a timer, see an explanation after every answer and finish with a printable mark sheet.
What the Risk of Bias & GRADE Quiz covers
Finding the right studies is only half of a systematic review. You then extract the same data from every study, judge how far each result can be trusted with the right risk-of-bias tool, and rate how certain the whole body of evidence is with GRADE. Reviewers and editors check these steps closely.
This quiz walks through that workflow, from piloting an extraction form to writing footnotes in a summary of findings table. Each explanation gives the rule behind the answer, using Cochrane and GRADE terminology, and weak topics in your mark sheet link to the free systematic review guide.
- Data extraction forms 9 questions
- RoB 2 for randomised trials 10 questions
- ROBINS-I and Newcastle–Ottawa 9 questions
- QUADAS-2 and bias plots 8 questions
- GRADE certainty of evidence 11 questions
- Summary of findings tables 6 questions
- Sensitivity analyses 7 questions
Who it is for: MPhil and PhD students, early-career researchers and clinicians who are writing a systematic review or meta-analysis, or appraising one for a journal club.
How the quiz works
- Type your name if you want it printed on the mark sheet (optional; it never leaves your browser).
- Choose 10, 20 or 30 questions, a difficulty (Easy, Mixed or Hard) and the timer: Standard, Relaxed or none.
- Answer each question before the timer runs out. Press A–D or 1–4 on a keyboard, or tap an option on your phone.
- Read the explanation after every answer, then press Next.
- At the end, get your score, grade, topic-wise breakdown and a full answer review. Print it or save it as a PDF.
- Retake the quiz for a fresh random set, or practise only the topics you found hard.
Free video lessons from Codanics
Score lower than you hoped? These free lessons from the Codanics YouTube channel cover the same topics, explained step by step.
Free on the Codanics YouTube channel, taught in Urdu/Hindi.
Sample questions with answers
Here are 9 questions from the bank, with answers and explanations. The quiz above draws from all 60.
1. What is a GRADE summary of findings table?
- A table of key outcomes with effects and certainty ratings
- A list of all included studies with their funding sources
- A table of search strings for each database searched
- A checklist of PRISMA items with their page numbers
Answer: A. A table of key outcomes with effects and certainty ratings
A summary of findings table shows, for each important outcome, the relative and absolute effects, the number of participants and studies, and the GRADE certainty.
2. What is the main purpose of a sensitivity analysis in a meta-analysis?
- To split studies into groups that explain heterogeneity
- To check whether results hold when review decisions change
- To increase the total sample size of the pooled analysis
- To test whether the database search was sensitive enough
Answer: B. To check whether results hold when review decisions change
A sensitivity analysis repeats the analysis with a different, reasonable decision (excluding high-risk studies, another model) to see if the conclusion is robust.
3. Which tool assesses risk of bias in diagnostic test accuracy studies?
- RoB 2
- QUADAS-2
- ROBINS-I
- CONSORT
Answer: B. QUADAS-2
QUADAS-2 is designed for diagnostic accuracy studies. CONSORT is a reporting guideline for trials, not a risk-of-bias tool.
4. Which tool does Cochrane recommend for assessing risk of bias in randomised controlled trials?
- ROBINS-I
- Newcastle–Ottawa Scale
- QUADAS-2
- RoB 2
Answer: D. RoB 2
RoB 2 is the Cochrane tool for randomised trials. ROBINS-I is for non-randomised intervention studies and QUADAS-2 for diagnostic accuracy studies.
5. A trial is low risk in four domains but high risk for missing outcome data (30% drop-out in one arm, no sensitivity analysis). What is the overall RoB 2 judgement?
- Low risk of bias
- Some concerns
- Moderate risk of bias
- High risk of bias
Answer: D. High risk of bias
The overall judgement is at least as severe as the worst domain, so one high-risk domain makes the result high risk. “Moderate” is not a RoB 2 category.
6. What are the four GRADE levels of certainty of evidence?
- High, moderate, low, very low
- Low, some concerns, high, critical
- Strong, weak, conditional, absent
- Level I, II, III and IV
Answer: A. High, moderate, low, very low
GRADE rates certainty as high, moderate, low or very low for each outcome. Strong and conditional describe GRADE recommendations, not certainty.
7. Pooled results from five trials differ a lot (I² = 82%) and no subgroup analysis explains why. Which GRADE domain applies?
- Imprecision
- Inconsistency
- Indirectness
- Publication bias
Answer: B. Inconsistency
Unexplained heterogeneity, shown by a high I² and point estimates that point in different directions, is rated under inconsistency.
8. Which tool is designed to assess risk of bias in non-randomised studies of interventions?
- RoB 2
- ROBINS-I
- QUADAS-2
- AMSTAR 2
Answer: B. ROBINS-I
ROBINS-I stands for Risk Of Bias In Non-randomised Studies of Interventions. AMSTAR 2 appraises systematic reviews, not primary studies.
9. In a systematic review, what does “dual extraction” mean?
- One reviewer extracts the data twice on two different days
- Two reviewers extract data from each study independently, then compare
- Data are extracted from both the abstract and the full text
- Two software tools are used to extract the same data fields
Answer: B. Two reviewers extract data from each study independently, then compare
Dual (double) extraction means two people extract the same data independently and then compare. It catches typing and reading errors that a single reviewer would miss.
Free guides and blogs to study
Free tools for your studies and research
Codanics also has 160+ free online tools for students and researchers: statistics calculators, meta-analysis, PDF and writing tools. They run in your browser, with no login.
🖋️ All scientific writing tools and quizzes → Reference checker, APA results sentences, writing checklists and more, all free.
Frequently asked questions
Is the Risk of Bias & GRADE Quiz free?
Yes. The Risk of Bias & GRADE Quiz is completely free, with no sign-up, no login and no limit on attempts.
How many questions are in the Risk of Bias & GRADE Quiz?
The question bank has 60 multiple-choice questions (20 easy, 24 medium and 16 hard) across 7 topics. Each attempt draws 10, 20 or 30 of them at random, so every attempt is different.
How does the timer work?
Each question has its own countdown: about 25 seconds for easy, 40 for medium and 55 for hard questions, plus 15 seconds when there is code to read. Choose Relaxed to double the time or switch the timer off to study at your own pace. Unanswered questions count as skipped.
Can I get a certificate or mark sheet?
Yes. When you finish, you get a mark sheet with your name, score, grade, time, topic-wise performance and every answer explained. Use Print or save as PDF to keep it. It is a self-assessment result, not an official certificate.
Are the answers and explanations correct?
Every question was written and reviewed for one clearly correct answer, and code questions were checked by running the code. If you think an answer is wrong, tell us on the Codanics WhatsApp channel or in the YouTube comments and we will fix it.
What is the difference between risk of bias and GRADE?
Risk of bias is judged for each study or result, with tools such as RoB 2, ROBINS-I or QUADAS-2. GRADE rates the certainty of the whole body of evidence for each outcome, and risk of bias is one of its five reasons to rate down, together with inconsistency, indirectness, imprecision and publication bias.
Which risk-of-bias tool should I use for my systematic review?
Match the tool to the study design: RoB 2 for randomised trials, ROBINS-I for non-randomised studies of interventions, the Newcastle–Ottawa Scale for cohort and case-control studies, and QUADAS-2 for diagnostic accuracy studies. State your choice in the protocol.
Where can I learn to write a full systematic review step by step?
The Scientific Writing Marathon by Dr. Muhammad Aammar Tufail covers review protocols, screening, data extraction, risk of bias, meta-analysis and GRADE, then writing the review for a journal. Recorded lectures stay on the LMS so you can learn at your own pace.
Is my data stored anywhere?
No. The quiz runs entirely in your browser. Your name, answers and score are not uploaded. Your best score and settings are remembered only in this browser so you can track your progress.
More free quizzes
See all Codanics quizzes → · Courses · Free tools · Blog



