Soil Texture Calculator: USDA Texture Triangle from Sand, Silt and Clay
Enter the percentages of sand, silt and clay from your particle-size analysis (hydrometer or pipette method) and get the USDA soil texture class, shown as a point on the soil texture triangle. Paste many samples at once to classify a whole survey and download the classes with a triangle plot for your thesis.
Leave one box empty to have it calculated as 100 minus the other two.
Tip: click anywhere on the triangle to read its texture.
- PriceFree, no login or sign-up needed
- Your dataProcessed in your browser, never uploaded
- Works onPhone, tablet or computer, any modern browser
- Made byDr. Muhammad Aammar Tufail, Codanics
- Published17 November 2026
- Last updated16 November 2026
📚 How to cite this tool
This tool is free. If it helped your thesis, paper, report or assignment, please cite it. It keeps the tools free and helps other students find them.
Tufail, M. A. (2026). Soil texture calculator: USDA texture triangle [Online tool]. Codanics. Retrieved 16 November 2026, from https://codanics.com/tools/soil-texture-calculator/
In-text citation: (Tufail, 2026) · Narrative: Tufail (2026)
The access date is today’s date, filled in automatically. Author: Muhammad Aammar Tufail. Published 17 November 2026.
How to use the soil texture calculator
- Enter the sand, silt and clay percentages from your particle-size analysis. If you only have two of them, leave the third box empty and it will be calculated.
- Click Classify soil to see the USDA texture class and the point on the texture triangle. You can also click anywhere on the triangle to read the class at that point.
- For a survey with many samples, open Many samples, paste or upload a table of sample name, sand, silt and clay, and classify them all at once.
- Download the triangle as PNG or SVG and the classified samples as CSV.
How to read the soil texture triangle
The USDA soil texture triangle has one side for each fraction: clay (left side, increasing upwards), silt (right side) and sand (bottom, increasing to the left). Follow the clay line horizontally, the silt line down to the left and the sand line up to the left; they meet in one point, and the area containing that point is the texture class. The three fractions must add up to 100%.
USDA class limits
| Class | Main limits (%) | Group |
|---|---|---|
| Sand | silt + 1.5 × clay < 15 | Coarse |
| Loamy sand | silt + 1.5 × clay ≥ 15 and silt + 2 × clay < 30 | Coarse |
| Sandy loam | clay 7–20 and sand > 52, or clay < 7 and silt < 50 (and silt + 2 × clay ≥ 30) | Moderately coarse |
| Loam | clay 7–27, silt 28–50, sand ≤ 52 | Medium |
| Silt loam | silt ≥ 50 and clay 12–27, or silt 50–80 and clay < 12 | Medium |
| Silt | silt ≥ 80, clay < 12 | Medium |
| Sandy clay loam | clay 20–35, silt < 28, sand > 45 | Moderately fine |
| Clay loam | clay 27–40, sand 20–45 | Moderately fine |
| Silty clay loam | clay 27–40, sand ≤ 20 | Moderately fine |
| Sandy clay | clay ≥ 35, sand > 45 | Fine |
| Silty clay | clay ≥ 40, silt ≥ 40 | Fine |
| Clay | clay ≥ 40, sand ≤ 45, silt < 40 | Fine |
Limits follow the USDA-NRCS Soil Survey Manual (2017) and the NRCS soil texture calculator. Lower limits are inclusive.
Why texture matters
Texture controls water-holding capacity, drainage, aeration, workability and nutrient retention. Sandy soils drain quickly and hold few nutrients; clay soils hold water and nutrients but can be poorly aerated; loams balance both. Texture is reported in nearly every soil, agronomy and environmental thesis, usually in the site-description table.
Measuring sand, silt and clay
Particle-size analysis by the hydrometer (Bouyoucos) or pipette method after removing organic matter and dispersing the soil gives the percentages of sand (2–0.05 mm), silt (0.05–0.002 mm) and clay (< 0.002 mm). Note that some national systems (for example the international/Atterberg system and some European systems) use 0.02 or 0.063 mm as the sand–silt limit, which gives different classes.
References: Soil Science Division Staff (2017) Soil Survey Manual, USDA Handbook 18 · Gee GW, Bauder JW (1986) Particle-size analysis, in Methods of Soil Analysis Part 1 · Groenendyk DG et al. (2015) Soil Sci Soc Am J 79:1011.
Frequently asked questions
How do I find soil texture from sand, silt and clay?
Locate the clay percentage on the left side of the texture triangle, silt on the right and sand on the bottom; the lines meet in one texture class. Or type the three percentages above and the calculator gives the USDA class and plots the point.
What is the texture of 40% sand, 40% silt and 20% clay?
Loam. Loam has 7–27% clay, 28–50% silt and no more than 52% sand.
My percentages don't add up to 100. What happens?
The values are rescaled to 100% and a warning is shown. Large differences usually mean gravel, organic matter or measurement error; check your lab data.
Does this work for the FAO/WRB or other texture systems?
FAO and WRB use the same 12 classes and 0.05 mm sand–silt limit as USDA. Systems with a different silt limit (e.g. 0.02 mm international, 0.063 mm in some European countries) need conversion before using this triangle.
What is the difference between texture class and texture group?
The texture group (coarse, moderately coarse, medium, moderately fine, fine) combines similar classes and is often used for management recommendations such as irrigation and tillage.
Is my data uploaded?
No. Everything runs in your browser.
Do I need to log in or create an account to use the soil texture calculator?
No. There is no login, no sign-up and no email required. Open the page and start using it straight away, for free, on any device.
How do I cite this tool in my thesis or paper?
Use the citation box on this page. In APA 7th edition: Tufail, M. A. (2026). Soil texture calculator: USDA texture triangle [Online tool]. Codanics. Retrieved [date you used it], from https://codanics.com/tools/soil-texture-calculator/. BibTeX, RIS (EndNote, Mendeley, Zotero), MLA, Harvard, Chicago and Vancouver formats are also available.
Free guides and courses from Codanics
More free tools
See all free Codanics tools → · Codanics on YouTube · WhatsApp channel