Enzyme Kinetics Calculator: Michaelis–Menten Vmax, Km and kcat with Lineweaver–Burk Plots
Enter substrate concentrations and reaction rates for one or more conditions. The calculator fits the Michaelis–Menten equation by nonlinear regression and gives Vmax, Km (and kcat) with standard errors and 95% CIs, tests the Hill and substrate-inhibition models, compares conditions such as treated vs untreated, and draws Lineweaver–Burk, Eadie–Hofstee and Hanes–Woolf plots for teaching.
- PriceFree, no login or sign-up needed
- Your dataProcessed in your browser, never uploaded
- Works onPhone, tablet or computer, any modern browser
- Made byDr. Muhammad Aammar Tufail, Codanics
- Published16 November 2026
- Last updated16 November 2026
📚 How to cite this tool
This tool is free. If it helped your thesis, paper, report or assignment, please cite it. It keeps the tools free and helps other students find them.
Tufail, M. A. (2026). Enzyme kinetics calculator (Michaelis–Menten) [Online tool]. Codanics. Retrieved 16 November 2026, from https://codanics.com/tools/enzyme-kinetics-calculator/
In-text citation: (Tufail, 2026) · Narrative: Tufail (2026)
The access date is today’s date, filled in automatically. Author: Muhammad Aammar Tufail. Published 16 November 2026.
How to use the Enzyme Kinetics Calculator
- Type or paste substrate concentration and rate pairs into a condition box, one pair per line (extra columns on a line are treated as replicate rates). Use + Add condition for treated vs untreated, mutant vs wild type or with vs without inhibitor, or upload a CSV / Excel file.
- Set the units, and the enzyme concentration if you want kcat and catalytic efficiency (kcat/Km).
- Click Fit kinetics. Read Vmax and Km with their standard errors and 95% CIs, check the model comparison (Hill and substrate inhibition) and, with two or more conditions, whether Vmax and Km differ.
- Switch between the Lineweaver–Burk, Eadie–Hofstee and Hanes–Woolf plots to visualise the data, copy the results sentence and download the charts and a CSV file.
The Michaelis–Menten equation
For many enzymes the initial reaction rate v rises with substrate concentration [S] and levels off at a maximum, Vmax, when the enzyme is saturated. Km (the Michaelis constant) is the substrate concentration at which the rate is half of Vmax; a low Km means the enzyme reaches half-saturation at low substrate concentrations. The turnover number kcat = Vmax / [E]t is the number of substrate molecules each active site converts per second, and kcat/Km (catalytic efficiency) compares how well an enzyme uses different substrates.
Why nonlinear regression instead of a Lineweaver–Burk plot?
Before computers, Vmax and Km were read from straight-line transformations. The Lineweaver–Burk (double reciprocal) plot is still in every textbook, but taking 1/v turns the small, noisy rates at low substrate concentrations into huge values that dominate the regression line. Fitting the Michaelis–Menten curve directly by nonlinear least squares weights every point fairly and gives honest standard errors. Journals and reviewers now expect nonlinear estimates; use the linear plots only to display data or to recognise inhibition patterns (competitive inhibitors change the x-intercept, non-competitive inhibitors change the y-intercept).
Comparing conditions
To test whether an inhibitor, a mutation or a treatment changes the kinetics, the calculator fits all conditions together with a shared residual variance. It reports the difference in Vmax and Km with a t-test, and extra sum-of-squares F tests that compare the full model with models forcing a common Vmax, a common Km or one common curve. In the Puromycin example, the treated enzyme has a clearly higher Vmax (by about 52 counts/min², p < .001), while the difference in Km is not significant (p ≈ .17), exactly as an indicator-variable nls() fit in R shows.
| Pattern | Vmax | Km | Typical cause |
|---|---|---|---|
| Competitive inhibition | Unchanged | Increases | Inhibitor competes for the active site |
| Non-competitive inhibition | Decreases | Unchanged | Inhibitor binds elsewhere with equal affinity |
| Uncompetitive inhibition | Decreases | Decreases | Inhibitor binds only the enzyme–substrate complex |
| Mixed inhibition | Decreases | Changes | Inhibitor binds both forms with different affinity |
Good experimental design
- Measure initial rates (the linear part of each progress curve, usually under 10% substrate conversion).
- Use 6–10 substrate concentrations spread from about 0.2 × Km to 5–10 × Km, ideally in duplicate or triplicate. Plan the series with the dilution calculator and make stocks with the molarity calculator.
- If the rate falls at high substrate concentrations, compare the substrate-inhibition model; if the curve is sigmoidal, compare the Hill model.
- For protein or product measurements read from a calibration curve, use the standard curve calculator first.
How to report enzyme kinetics
Learn nonlinear regression in R with the R with Aammar course.
Frequently asked questions
What is the difference between Vmax and Km?
Vmax is the maximum reaction rate when the enzyme is saturated with substrate; it depends on the amount of enzyme. Km is the substrate concentration that gives half of Vmax; it is a property of the enzyme–substrate pair and does not depend on enzyme amount.
How do I calculate kcat?
kcat = Vmax / [E]t, where [E]t is the total concentration of active enzyme in the same concentration unit as the rate (for example Vmax in µM/min and [E]t in µM). Enter [E]t and the time unit of your rate, and the calculator converts kcat to s⁻¹ and also gives kcat/Km.
Should I use the Lineweaver–Burk plot to get Km?
No. The double reciprocal plot gives biased estimates because it inflates the error of low-substrate points. Use the nonlinear Michaelis–Menten fit, which is what this calculator reports, and show the Lineweaver–Burk plot only for illustration or to identify the type of inhibition.
How do I know if my enzyme shows cooperativity or substrate inhibition?
Look at the model comparison table. If the Hill model has a lower AICc and the F test is significant, the curve is sigmoidal (h > 1 suggests positive cooperativity). If the substrate-inhibition model fits better and the rate falls at high [S], report Ki as well.
How are two conditions compared?
The calculator fits both conditions together with a common residual variance and tests the difference in Vmax and in Km (t-tests), plus extra sum-of-squares F tests for a shared Vmax, a shared Km and a shared curve. This is the same as fitting an indicator-variable model with nls() in R.
Can I use the results for my thesis?
Yes. The fit uses the same least-squares method as R’s nls() and GraphPad Prism; the Puromycin example reproduces R’s estimates and standard errors. Report Vmax and Km with their SE or 95% CI and the number of data points.
Is my data uploaded?
No. All calculations run in your browser. Nothing is sent to or stored on our server.
Do I need to log in or create an account to use the Enzyme Kinetics Calculator?
No. There is no login, no sign-up and no email required. Open the page and start using it straight away, for free, on any device.
How do I cite this tool in my thesis or paper?
Use the citation box on this page. In APA 7th edition: Tufail, M. A. (2026). Enzyme kinetics calculator (Michaelis–Menten) [Online tool]. Codanics. Retrieved [date you used it], from https://codanics.com/tools/enzyme-kinetics-calculator/. BibTeX, RIS (EndNote, Mendeley, Zotero), MLA, Harvard, Chicago and Vancouver formats are also available.
Free guides and courses from Codanics
More free tools
See all free Codanics tools → · Codanics on YouTube · WhatsApp channel