Lab & life science

Centrifuge RPM to RCF (× g) Calculator, With Rotor Presets and k-Factor

Protocols say “spin at 12,000 × g” but your centrifuge shows rpm. Enter the rotor radius and get the rpm for any × g (or the × g for any rpm), at the minimum, average and maximum radius. Save the rotors in your lab once, and convert run times between rotors with the k-factor.

✅ No login needed100% freeRuns in your browserYour data stays on your device
Centrifuge RPM to RCF Calculator✅ Free · no login📚 Cite this tool
Your data never leaves your PC. Your data is analysed on your own computer or phone, even when you upload a CSV or Excel file. Nothing is uploaded, stored or seen by Codanics, and no login is needed.
  • PriceFree, no login or sign-up needed
  • Your dataProcessed in your browser, never uploaded
  • Works onPhone, tablet or computer, any modern browser
  • Made byDr. Muhammad Aammar Tufail, Codanics
  • Published17 November 2026
  • Last updated16 November 2026

📚 How to cite this tool

This tool is free. If it helped your thesis, paper, report or assignment, please cite it. It keeps the tools free and helps other students find them.

Citation · APA 7th edition

Tufail, M. A. (2026). Centrifuge RPM to RCF calculator [Online tool]. Codanics. Retrieved 16 November 2026, from https://codanics.com/tools/centrifuge-rpm-rcf-calculator/

In-text citation: (Tufail, 2026) · Narrative: Tufail (2026)

The access date is today’s date, filled in automatically. Author: Muhammad Aammar Tufail. Published 17 November 2026.

🚀 Follow Codanics channel on WhatsApp for more updatesNew free tools, scholarships, PhD positions and research tips, straight to your phone. Free lessons on YouTube too.

How to use the centrifuge rpm to rcf calculator

  1. Choose the direction: × g → rpm (protocol gives × g) or rpm → × g.
  2. Enter the rotor’s maximum radius in cm (from the rotor or its manual). Add r-min to see r-average and the k-factor.
  3. Optionally enter the rotor’s maximum speed to get a warning when you exceed it, and save the rotor for next time.
  4. Read the rpm or × g, and use the table or copy the line into your protocol. For different rotors, use the k-factor tab to convert run times.

RPM to RCF formula

The relative centrifugal force (RCF, written as × g) depends on the speed and the radius, which is why the same rpm gives a different × g in different rotors:

RCF = r × ω² / g with ω = 2π × rpm / 60 and g = 980.665 cm/s² RCF = 1.118 × 10⁻⁵ × r (cm) × rpm² rpm = √( RCF / (1.118 × 10⁻⁵ × r) )

Worked example: 12,000 × g in a rotor with r-max = 8.4 cm needs √(12,000 / (1.11825 × 10⁻⁵ × 8.4)) = 11,303 rpm. The same rotor at 12,000 rpm gives 13,526 × g.

Which radius should I use?

Protocols usually quote RCF at r-max (the bottom of the tube), which is what manufacturers print. The force at the top of the liquid (r-min) is lower, and r-average is a fair summary for the whole tube. If a protocol does not say, assume r-max.

k-factor: converting run times between rotors

k = 2.533 × 10¹¹ × ln(r-max / r-min) / rpm² t₂ = t₁ × k₂ / k₁

The k-factor describes pelleting efficiency: a smaller k pellets particles faster. It lets you move an ultracentrifuge protocol from one rotor to another without losing yield.

Always balance tubes, never exceed the rotor’s rated speed (lower it for dense solutions as the manual says), and check the rotor’s life log for ultracentrifuges.
Learn the statistics behind these numbers. Codanics has free statistics, R and Python lessons on YouTube and full courses for researchers.

Frequently asked questions

How do I convert rpm to × g?

Multiply 1.118 × 10⁻⁵ by the rotor radius in cm and by the square of the rpm. For example, 10,000 rpm in a 7 cm rotor = 1.118 × 10⁻⁵ × 7 × 10,000² ≈ 7,828 × g.

How do I convert × g to rpm?

Divide the × g by (1.118 × 10⁻⁵ × radius in cm) and take the square root. 5,000 × g in a 10 cm rotor needs √(5,000 / 1.118 × 10⁻⁴) ≈ 6,687 rpm.

Where do I find the rotor radius?

It is printed on most rotors and listed in the rotor or centrifuge manual as r-max (and sometimes r-min and r-av). You can also measure from the centre of the spindle to the bottom of a tube in its holder.

Why do protocols use × g instead of rpm?

Because × g is the actual force on the sample and is the same in every centrifuge, while rpm gives different forces in rotors of different sizes.

What is the k-factor?

A number that describes how quickly a rotor pellets particles at a given speed. Run time scales with k, so t₂ = t₁ × k₂ / k₁ converts a protocol to another rotor.

Are my saved rotors uploaded?

No. Saved rotors are kept only in this browser’s local storage, and every calculation runs on your device.

Do I need to log in or create an account to use the centrifuge rpm to rcf calculator?

No. There is no login, no sign-up and no email required. Open the page and start using it straight away, for free, on any device.

How do I cite this tool in my thesis or paper?

Use the citation box on this page. In APA 7th edition: Tufail, M. A. (2026). Centrifuge RPM to RCF calculator [Online tool]. Codanics. Retrieved [date you used it], from https://codanics.com/tools/centrifuge-rpm-rcf-calculator/. BibTeX, RIS (EndNote, Mendeley, Zotero), MLA, Harvard, Chicago and Vancouver formats are also available.

Free guides and courses from Codanics

More free tools

See all free Codanics tools → · Codanics on YouTube · WhatsApp channel

Made by Dr. Muhammad Aammar Tufail, Codanics. First published 17 November 2026, last updated 16 November 2026. Found a bug or have an idea for a new tool? Tell us on the WhatsApp channel or in the comments on YouTube. Results are for learning and planning; check important analyses with a statistician or your supervisor.